Desain Dan Pengembangan Safety Simulator Jatuh Dari Ketinggian Berbasis Arduino Untuk Pembelajaran Keselamatan Kerja
DOI:
https://doi.org/10.53494/jtm.v12i1.1479Kata Kunci:
Safety Simulator, Arduino Uno, Keselamatan Kerja, Jatuh dari Ketinggian, Pembelajaran K3Abstrak
Pekerjaan pada ketinggian memiliki risiko kecelakaan yang memerlukan media pembelajaran keselamatan yang mampu memberikan pengalaman simulatif dalam kondisi terkendali. Penelitian ini mengembangkan safety simulator jatuh dari ketinggian berbasis Arduino Uno sebagai media pembelajaran K3. Metode yang digunakan adalah research development melalui tahapan identifikasi kebutuhan, perancangan, pembuatan prototipe, integrasi komponen, pengujian, dan evaluasi. Sistem menggunakan sensor pada D2 serta empat relay pada D3 hingga D6 dengan kendali berurutan. Hasil pengujian menunjukkan simulator menjalankan R2 selama 10s, R3 selama 2s, jeda 20s, dan R4 selama 10s dengan total waktu operasi terprogram 47s. Prototipe berfungsi secara otomatis dan dapat mendukung pembelajaran keselamatan kerja pada aktivitas ketinggian.
Referensi
Al-Khiami, M. I., & Jaeger, M. (2023a). Safer Working at Heights: Exploring the Usability of Virtual Reality for Construction Safety Training among Blue-Collar Workers in Kuwait. Safety, 9(3), 63. https://doi.org/10.3390/safety9030063
Al-Khiami, M. I., & Jaeger, M. (2023b). Safer Working at Heights: Exploring the Usability of Virtual Reality for Construction Safety Training among Blue-Collar Workers in Kuwait. Safety, 9(3), 63. https://doi.org/10.3390/safety9030063
Al-Khiami, M. I., & Jaeger, M. (2023c). Safer Working at Heights: Exploring the Usability of Virtual Reality for Construction Safety Training among Blue-Collar Workers in Kuwait. Safety, 9(3), 63. https://doi.org/10.3390/safety9030063
Alzarrad, A., Miller, M., Durham, L., & Chowdhury, S. (2024). Revolutionizing construction safety: introducing a cutting-edge virtual reality interactive system for training US construction workers to mitigate fall hazards. Frontiers in Built Environment, 10. https://doi.org/10.3389/fbuil.2024.1320175
Arba’i Yusuf, Asni Tafrikhatin, Jati Sumarah, & Hudaifah, N. N. (2023). Media Pembelajaran Sensor Berbasis Arduino Uno Untuk Pembelajaran Mikrokontroler Pemula. JASATEC : Journal of Students of Automotive, Electronic and Computer, 3(1), 15–26. https://doi.org/10.37339/jasatec.v3i1.1403
Arba’i Yusuf, Iramawati, I., & Asni Tafrikhatin. (2023). Rancang Bangun Prototipe Jemuran Pakaian Otomatis Menggunakan Sensor LDR dan Sensor Hujan Berbasis Mikrokontroler Atmega 328. JASATEC : Journal of Students of Automotive, Electronic and Computer, 2(2), 46–53. https://doi.org/10.37339/jasatec.v2i2.1425
Bao, L., Tran, S. V.-T., Nguyen, T. L., Pham, H. C., Lee, D., & Park, C. (2022). Cross-platform virtual reality for real-time construction safety training using immersive web and industry foundation classes. Automation in Construction, 143, 104565. https://doi.org/10.1016/j.autcon.2022.104565
Firdaus, F., & Erwandi, D. (2023). KAJIAN LITERATUR: FAKTOR PENYEBAB KECELAKAAN JATUH DARI KETINGGIAN DI SEKTOR KONSTRUKSI. Jurnal Kesehatan Tambusai, 4(2), 2297–2302. https://doi.org/10.31004/jkt.v4i2.15650
Fitrinisa, E. F., & Rakhmadi, T. (2024). TINGKAT KEPATUHAN K3 PADA PEKERJA KETINGGIAN DI PROJECT PT X PEKALONGAN BERDASARKAN PERMENAKER NOMOR 9 TAHUN 2016. Bhamada Occupational Health and Safety Environment Journal, 2(2), 28–34. https://doi.org/10.36308/bohsej.v2i2.737
Jati Sumarah, Ajeng Tiara Wulandari, Asni Tafrikhatin, Juri Benedi, & Akrim Rakhmatika Pambudi. (2024). Making an Arduino Uno R3 Trainer as A Learning Support Tool in The Electronics Study Program. Jurnal E-Komtek (Elektro-Komputer-Teknik), 8(1), 40–45. https://doi.org/10.37339/e-komtek.v8i1.1750
Jhoni, M., Afiah, N., Alparesa, I., Sugiarni, A., & Putri, S. (2022). PENGEMBANGAN MEDIA PEMBELAJARAN FISIKA BERBASIS ARDUINO UNO R3 PADA MATERI GERAK JATUH BEBAS. ORBITA: Jurnal Pendidikan Dan Ilmu Fisika, 8(1), 160. https://doi.org/10.31764/orbita.v8i1.8419
Rante, J. C., Singgeta, R. L., Padachan, C. M. M., & Koyongian, R. (2023). Rancang Bangun Alat Gerak Jatuh Bebas Berbasis Arduino Uno Pada Praktikum Fisika. JEECOM Journal of Electrical Engineering and Computer, 5(2), 236–243. https://doi.org/10.33650/jeecom.v5i2.6877
Rey-Becerra, E., Barrero, L. H., Ellegast, R., & Kluge, A. (2021a). The effectiveness of virtual safety training in work at heights: A literature review. Applied Ergonomics, 94, 103419. https://doi.org/10.1016/j.apergo.2021.103419
Rey-Becerra, E., Barrero, L. H., Ellegast, R., & Kluge, A. (2021b). The effectiveness of virtual safety training in work at heights: A literature review. Applied Ergonomics, 94, 103419. https://doi.org/10.1016/j.apergo.2021.103419
Rey-Becerra, E., Barrero, L. H., Ellegast, R., & Kluge, A. (2023a). Improvement of short-term outcomes with VR-based safety training for work at heights. Applied Ergonomics, 112, 104077. https://doi.org/10.1016/j.apergo.2023.104077
Rey-Becerra, E., Barrero, L. H., Ellegast, R., & Kluge, A. (2023b). Improvement of short-term outcomes with VR-based safety training for work at heights. Applied Ergonomics, 112, 104077. https://doi.org/10.1016/j.apergo.2023.104077
Robson, L. S., Landsman, V., Smith, P. M., & Mustard, C. A. (2024a). Evaluation of the Ontario Mandatory Working-at-Heights Training Requirement in Construction, 2012‒2019. American Journal of Public Health, 114(1), 38–41. https://doi.org/10.2105/AJPH.2023.307440
Robson, L. S., Landsman, V., Smith, P. M., & Mustard, C. A. (2024b). Evaluation of the Ontario Mandatory Working-at-Heights Training Requirement in Construction, 2012‒2019. American Journal of Public Health, 114(1), 38–41. https://doi.org/10.2105/AJPH.2023.307440
Robson, L. S., Lee, H., Amick III, B. C., Landsman, V., Smith, P. M., & Mustard, C. A. (2020). Preventing fall-from-height injuries in construction: Effectiveness of a regulatory training standard. Journal of Safety Research, 74, 271–278. https://doi.org/10.1016/j.jsr.2020.06.007
Sembiring, S., & Buchari, M. A. (2021). Perancangan dan Implementasi Sistem Pengendalian dan Monitoring Penggunaan Peralatan Elektronik Berbasis Internet of Thing (IoT). JURNAL MEDIA INFORMATIKA BUDIDARMA, 5(4), 1585. https://doi.org/10.30865/mib.v5i4.3353
Stothard, P., & van den Hengel, A. (2010). Development of serious computer game based training module and its integration into working at heights mine site induction—Part I. Mining Technology, 119(2), 68–78. https://doi.org/10.1179/037178410X12780655704644
Yu, W.-D., Wang, K.-C., & Wu, H.-T. (2022). Empirical Comparison of Learning Effectiveness of Immersive Virtual Reality–Based Safety Training for Novice and Experienced Construction Workers. Journal of Construction Engineering and Management, 148(9). https://doi.org/10.1061/(ASCE)CO.1943-7862.0002337
Zermane, A., Mohd Tohir, M. Z., Baharudin, M. R., & Mohamed Yusoff, H. (2022). Risk assessment of fatal accidents due to work at heights activities using fault tree analysis: Case study in Malaysia. Safety Science, 151, 105724. https://doi.org/10.1016/j.ssci.2022.105724
