PERANCANGAN MODUL PENGENDALI SUHU DAN MODUL PENGENDALI RAK GESER TELUR PADA MESIN TETAS TELUR OTOMATIS KAPASITAS 90 BUTIR
Kata Kunci:
Mesin Tetas Telur Otomatis, Modul Pengendali Suhu, Modul Pengendali Rak Geser TelurAbstrak
Teknologi membawa perubahan besar dalam membantu pekerjaan manusia termasuk dalam industri peternakan. Otomatisasi dalam industri peternakan telah menjadi tren utama dalam upaya meningkatkan efisiensi operasional, meningkatkan kesejahteraan hewan, dan mengoptimalkan hasil produksi.Industri peternakan dapat menerapkan otomatisasi berupa mesin tetas otomatis. Penerapan teknologi ini dapat meningkatkan efisiensi dan konsistensi penetasan telur. Penurunan risiko yang dilakukan oleh operator selama pengawasan dan pengaturan kondisi inkubasi dapat dihindariDi dalam penelitian ini dilakukan perancangan modul pengendali pada mesin tetas telur otomatis. Modul XH-W3001 dipilih sebaagai modul pengendali suhu mesin tetas telur. Suhu ruang tetas diatur sebsar 37,5oC – 38oC. Modul DH48S-S dipilih sebagai modul pengendali mekanisme pemutar telur. Mekanisme pemutar telur beropoerasi setiap 4 jam secara berkala
Referensi
Smith, J. (2020). “The Rise of Automation in the 21st Century”. Journal of Automation Studies, 5(2), 45-58.
Sobirin, M. I. (2017). “Perancangan, Pembuatan, dan Pengujian Modul Pemantauan Waktu Pemotongan dan Konsumsi Energi dengan Studi Kasus Mesin CNC VMC 250”, Bandung: Institut Teknologi Bandung.
Smith, J., & Johnson, A. (2020). "Advancements in Automated Feeding Systems for Livestock" Journal of Agricultural Engineering, 15(2), 45-62.
Brown, L., & Davis, R. (2018). "Automated Health Monitoring Systems for Dairy Cattle: A Review" Livestock Science Review, 25(4), 112-128.
Deepa, N., & Raja, K. P. (2019). “Design and Development of Automatic Egg Incubator Using Arduino”. In 2019 International Conference on Communication and Electronics Systems (ICCES) (pp. 1034-1039).
Lee, S. K., & Lee, K. W. (2019). “Development of Multi-Zone Control Egg Incubator”. International Journal of Precision Engineering and Manufacturing-Green Technology, 6(2), 415-424.
Robotics and Automation Society. (2022). “Trends and Challenges in Automation”. (Online). (https://ras.org/trends-and-challenges-automation, diakses 8 Juni 2024).
Robinson, K., & White, S. (2019). "Technological Innovations in Poultry Farming: A Case Study of Automated Environmental Control Systems." Poultry Science Journal, 18(3), 76-89.
Gupta, P., & Sharma, S. (2021). "Impact of Automation on Dairy Farming: A Comparative Analysis." International Journal of Dairy Technology, 30(1), 102-115.
Zhou, Y., & Zhu, J. (2020). “Design and Simulation of an Automatic Egg Incubator System Based on PLC”. In Proceedings of the 10th International Conference on Biological Engineering and Natural Sciences (ICBENS 2020) (pp. 132-136). doi:10.1145/3402963.3402978
Jia, Y., Guo, Y., Zhang, S., & Guo, G. (2020). “Design of Digital Temperature Controller Based on XH-W3001”. Journal of Physics: Conference Series, 1656, 012035. doi:10.1088/1742-6596/1656/1/012035
Yang, Z., Zhou, X., & Wang, H. (2019). “Design and Implementation of Temperature Control System Based on XH-W3001”. 2019 IEEE 4th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC), 1147-1150. doi:10.1109/IAEAC.2019.00033.
Datasheet XH-W3001 (2024). “XH-W3001 Operation Instruction”. (Online) (https://www.mantech.co.za/Datasheets/Products/XH-W3001-200505A.pdf, diakses, 8 Juni 2024).
Wu, H., & Cheng, M. (2019). “Design of Digital Timer Based on DH48S-S”. 2019 International Conference on Automation, Control and Robotics Engineering (CACRE), 154-158. doi:10.1109/CACRE.2019.00034
Zhu, J., & Chen, Q. (2017). “Development and Application of DH48S-S Digital Timer in Agricultural Automation”. 2017 IEEE International Conference on Mechatronics and Automation (ICMA), 1030-1034. doi:10.1109/ICMA.2017.8015737.
Datasheet DH48S-S (2024). ”DH48S Digital Timer Manual” (Online) (http://www.finglai.com/att//comp/fl-en/relays/time/relays/DH48S/DH48S.pdf, diakses 8 Juni 2024)
